Command Line Reference Guide

ip ip-address (OPTIONAL) Enter the keyword ip followed by the IP address of the
ARP entry you wish to clear.
no-refresh (OPTIONAL) Enter the keywords no-refresh to delete the ARP
entry from CAM. Or use this option with
interface or ip ip-
address to specify which dynamic ARP entries you want to delete.
NOTE: Transit traffic may not be forwarded during the period
when deleted ARP entries are resolved again and re-installed in
CAM. Use this option with extreme caution.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear host
Remove one or all dynamically learned host table entries.
S5000
Syntax
clear host name
Parameters
name Enter the name of the host to delete. Enter * to delete all host table
entries.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear ip fib stack-unit
Clear all forwarding information base (fib) entries in the specified stack-unit (use this command with caution, refer to
Usage Information below).
S5000
Syntax
clear ip fib stack—unit unit-number
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by the unit number. The
range is 0 to 11.
562