Command Line Reference Guide

8G Port speed is 8 Gbps.
Defaults An FC port autosenses the speed of a peer FC port.
Command Modes INTERFACE FIBRE_CHANNEL
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When an FC port autosenses the speed of a peer FC port, it auto-negotiates to determine its
speed.
To removed the configured port speed, enter the no speed {2G | 4G | 8G} command.
Example
FTOS(conf)#interface fibrechannel 0/11
FTOS(conf-if- fc-0/11)#speed 8g
Related
Commands
interface fibrechannel — configures a Fibre Channel interface on the switch.
show interfaces fibrechannel — displays the configuration of a Fibre Channel interface.
557