Command Line Reference Guide
show fc-trace-level
Display the currently configured FC trace level.
S5000
Syntax
show fc-trace-level
Parameters None
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the show fc-trace-level command to display the current trace level used to
record FC information in the FC trace file, where:
• 0: FC traces are turned off.
• 1: FC error messages are recorded.
• 2: FC warning messages are recorded.
• 3: FC informational messages are recorded.
• 4: All messages generated for FC operation on the switch are recorded.
To set the FC trace level, use the change fc-trace-level command.
Example
FTOS#show fc-trace-level
FC Trace Level = 4 (All)
FTOS#
Related
Commands
change fc-trace-level— changes the FC trace level used to record FC information in the trace
log.
show interfaces fibrechannel
Display the configuration of a Fibre Channel interface.
S5000
Syntax
show interfaces fibrechannel type slot/port
Parameters
fibrechannel
slot
/
port
Enter the keyword FibreChannel followed by slot/port numbers.
Valid slot numbers are from 0 to 11. The port range is from 0 to 47.
551