Command Line Reference Guide

Related
Commands
interface fibrechannel — configures a Fibre Channel interface on the switch.
show interfaces fibrechannel — displays the configuration of a Fibre Channel interface.
create fc-dump-support
Perform a dump of information on S5000 Fibre Channel operation.
S5000
Syntax
create fc-dump-support
Defaults None
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to perform a dump of S5000 Fibre Channel operation and store the FC dump
file in flash:/CORE_DUMP_DIR. Syslog messages are generated at the start and end of the FC
dump file creation.
Example
FTOS#create fc-dump-support
fabric
Configure the SAN fabric to which a Fibre Channel port connects.
S5000
Syntax
fabric fcoe-map
Parameters
fcoe-map Enter the name of the FCoE map which contains the FCoE/FC fabric to
which the Fibre Channel port connects.
Defaults None
Command Modes INTERFACE FIBRE_CHANNEL
Command History
Version 9.0(1.3) Introduced on the S5000.
548