Command Line Reference Guide
• 3 records FC informational messages.
• 4 records all messages generated for FC operation on the
switch.
Default: 4.
Defaults Trace level 4: All FC error messages on the switch are recorded in the FC dump file.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use this command to specify the level of trace information to be included in the FC trace log. To
display the trace log, enter the show file fcmfs:/TRACE_LOG_FC/
qstack_trace.log command.
Example
FTOS#change fc-trace-level 2
Related
Commands
show fc-trace-level— displays the currently configured FC trace level.
clear counters fibrechannel
Clear Fibre Channel statistics for an FC port.
S5000
Syntax
clear counters fibrechannel slot/port
Parameters
slot/port
For
slot
, enter the stack-unit number assigned to the switch. The
range of
slot
(stack-unit) numbers is 0 to 11. The range of
port
numbers is 0 to 47.
Defaults None
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Use the clear counters fibrechannel command to clear the statistics (counters)
displayed in show interfaces fibrechannel command output for a specified FC port.
Example
FTOS(conf)#clear counters fibrechannel 0/11
Clear counters on Fc 0/11 [confirm] yes
547