Command Line Reference Guide

show ip udp-helper
Display the configured UDP helper(s) on all interfaces.
S5000
Syntax
show ip udp-helper
Defaults none
Command Modes EXEC
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show ip udp-helper
--------------------------------------------------
Port UDP port list
--------------------------------------------------
Te 10/0 656, 658
Te 10/1 All
Related
Commands
debug ip udp-helper – enables debug and displays the debug information on a console.
ip udp-broadcast-address – configures a UDP IP address for broadcast.
ip udp-helper udp-port – enables the UDP broadcast feature on an interface either for all UDP
ports or a specified list of UDP ports.
Fibre Channel Interface Commands
The following commands are supported for Fibre Channel operation on the S5000.
change fc-trace-level
For debugging purposes, change the FC trace level used to record FC information in the trace log.
S5000
Syntax
change fc-trace-level number
Parameters
number
Trace level used to record FC information in the dump file. Range: 1 to
4, where:
0 turns FC traces off.
1 records FC error messages.
2 records FC warning messages.
546