Command Line Reference Guide

Related
Commands
interface – configures a physical interface on the switch.
show ip interface – displays Layer 3 information about the interfaces.
show interfaces – displays information on a specific physical interface or virtual interface.
show running-config ecmp-group
Display interfaces, LAG, or LAG link bundles being monitored for uneven traffic distribution using the ecmp-group
monitoring enable
command. The ECMP group could have a LAG or a list of 10G/40 interfaces (not just LAG link-
bundles).
S5000
Syntax
show running-config ecmp-group
Defaults Disabled.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
ecmp-group – configures a mechanism to monitor traffic distribution.
shutdown
Disable an interface.
S5000
Syntax
shutdown
To activate an interface, use the no shutdown command.
Defaults The interface is disabled.
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The shutdown command marks a physical interface as unavailable for traffic. To discover if
an interface is disabled, use the
show ip interface brief command. Disabled
interfaces are listed as down.
Disabling a VLAN or a port channel causes different behavior. When a VLAN is disabled, the
Layer 3 functions within that VLAN are disabled. Layer 2 traffic continues to flow. Entering the
shutdown command on a port channel disables all traffic on the port channel and the
531