Command Line Reference Guide

Related
Commands
show interfaces – displays information on a specific physical interface or virtual interface.
show interfaces switchport
Display only virtual and physical interfaces in Layer 2 mode. This command displays the Layer 2 mode interfaces’ IEEE
802.1Q tag status and VLAN membership.
S5000
Syntax
show interfaces switchport [interface-type slot/port ] | backup
| stack-unit unit-number ]
Parameters
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
backup Enter the keyword backup to view the backup interface for this
interface.
stack-unit
unit-
number
Enter the keyword stack-unit followed by the unit number. The
range is 0 to 11.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show interfaces switchport command for the Example
below.
Name Displays the interface’s type, slot, and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or
hybrid (“Hybrid”), which supports both untagged and tagged VLANs
by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. This field can
display native VLAN membership by port 13/0.
524