Command Line Reference Guide

• For a Fibre Channel interface, enter the keyword
FibreChannel followed by slot/port numbers. The port
range is 0 to 47.
• For a Loopback interface, enter the keyword loopback
followed by a number from 0 to 16383.
• For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
• For a Null interface, enter the keywords null 0.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show interfaces status
Port Description Status Speed Duplex Vlan
Te 0/0 Up 10000 Mbit Full --
Te 0/1 Down Auto Auto --
Te 0/2 Down Auto Auto --
Te 0/3 Down Auto Auto --
Te 0/4 Down Auto Auto --
Te 0/5 Down Auto Auto --
Te 0/6 Up 10000 Mbit Full 100
Te 0/7 Up 10000 Mbit Full --
Te 0/8 Down Auto Auto --
Te 0/9 Down Auto Auto --
Te 0/10 Down Auto Auto --
Te 0/11 Up 10000 Mbit Full 100
Te 0/24 Down Auto Auto --
Te 0/25 Down Auto Auto --
Te 0/26 Up 10000 Mbit Full --
Te 0/27 Up 10000 Mbit Full --
Te 0/28 Up 10000 Mbit Full --
Te 0/29 Up 10000 Mbit Full --
Te 0/30 Down Auto Auto --
Te 0/31 Down Auto Auto --
Te 0/32 Down Auto Auto --
Te 0/33 Down Auto Auto --
Te 0/34 Down Auto Auto --
Te 0/35 Down Auto Auto --
Fo 0/48 Down 40000 Mbit Auto --
Fo 0/52 Down 40000 Mbit Auto --
Fo 0/56 Down 40000 Mbit Auto --
Fo 0/60 Down 40000 Mbit Auto --
FTOS#
523