Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show interfaces dampening
Interface Supp Flaps Penalty Half-Life Reuse Suppress Max-Sup
State
Te 3/2 Up 0 0 20 800 4500 120
Te 3/10 Up 0 0 5 750 2500 20
FTOS#
Related
Commands
dampening – configures dampening on an interface.
show interfaces – displays information on a specific physical interface or virtual interface.
show interfaces configured – displays any interface with a non-default configuration.
show interfaces description
Display the descriptions configured on the interface.
S5000
Syntax
show interfaces [type slot/port] description
Parameters
interfaces
type
slot/port
(OPTIONAL) Enter the interfaces keyword followed by the
interface type and slot/port or number information, then enter the
description keyword.. Valid slot numbers are 0-11. The valid port
numbers for each interface type are listed below.
For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
For a range of interfaces, enter the keyword range followed
by slot/port number.
For a Fibre Channel interface, enter the keyword
FibreChannel followed by slot/port numbers. The port
range is 0 to 47.
For a Loopback interface, enter the keyword loopback
followed by a number from 0 to 16383.
For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
For a Null interface, enter the keywords null 0.
For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
519