Command Line Reference Guide

0 CRC, 0 overrun, 0 discarded
Output Statistics:
355 packets, 40162 bytes, 0 underruns
0 64-byte pkts, 355 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte
pkts
355 Multicasts, 0 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 collisions, 0 wreddrops
Rate info (interval 299 seconds):
Input 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Output 00.00 Mbits/sec, 0 packets/sec, 0.00% of line-rate
Time since last interface status change: 00:23:23
FTOS#
Related
Commands
show interfaces – displays information on a specific physical interface or virtual interface.
show interfaces dampening
Display interface dampening information.
S5000
Syntax
show interfaces dampening [[interface-type slot/port] [summary]
[detail]]
Parameters
interface-type
slot/port
(Optional) Enter the interface type followed by slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
summary (OPTIONAL) Enter the keyword summary to display the current
summary of dampening data, including the number of interfaces
configured and the number of interfaces suppressed, if any.
detail (OPTIONAL) Enter the keyword detail to display detailed interface
dampening data.
Defaults none
Command Modes EXEC
518