Command Line Reference Guide
no shutdown
!
interface TenGigabitEthernet 0/2
no ip address
portmode hybrid
switchport
dcb-policy input pfc3
no shutdown
show interfaces
Display information on a specific physical interface or virtual interface.
S5000
Syntax
show interfaces type slot/port
Parameters
interfaces
type
slot/port
Enter one of the following keywords and slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Fibre Channel interface, enter the keyword
FibreChannel followed by slot/port numbers. The port
range is 0 to 47.
• For a Loopback interface, enter the keyword loopback
followed by a number from 0 to 16383.
• For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
• For a Null interface, enter the keywords null 0.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
• For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
513