Command Line Reference Guide

For a Management interface, enter the keyword
managementethernet followed by slot/port numbers.
The port is 0.
For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
For a VLAN interface, enter the keyword vlan followed by a
VLAN id number from 1 to 4094.
stack-unit
unit-
number
(OPTIONAL) Enter the stack-unit keyword followed by the unit
number. The range is 0 to 11.
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
In the Example, the delta column displays changes since the last screen refresh.
The following are the monitor command menu options.
systest-3 Displays the host name assigned to the system.
monitor time Displays the amount of time since the monitor interface
command was entered.
time Displays the amount of time the chassis is up (since last reboot).
m Change the view from a single interface to all interfaces on the stack-
unit or visa-versa.
c Refresh the view.
b Change the counters displayed from Packets on the interface to
Bytes.
r Change the [delta] column from change in the number of packets/
bytes in the last interval to rate per second.
l Change the view to the next interface on the stack-unit.
a Change the view to the previous interface on the stack-unit.
T Increase the screen refresh rate.
t Decrease the screen refresh rate.
q Return to the CLI prompt.
Example (single
interface)
FTOS# monitor interface te 0/1
systest-3 Monitor time: 00:00:06 Refresh Intvl.: 2s Time:
03:26:26
Interface: Te 0/1, Enabled, Link is Up, Linespeed is 1000 Mbit
Traffic statistics: Current Rate Delta
507