Command Line Reference Guide

ip igmp snooping mrouter
Statically configure a VLAN member port as a multicast router interface.
S5000
Syntax
ip igmp snooping mrouter interface type slot/port
To delete a specific multicast router interface, use the no igmp snooping mrouter
interface type slot/port command.
Parameters
interface type
slot/port
Enter the interface keyword followed by the interface type and
slot/port or number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
Defaults Not configured.
Command Modes INTERFACE VLAN — (conf-if-vl- n )
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
FTOS provides the capability of statically configuring the interface to which a multicast router
is attached. To configure a static connection to the multicast router, enter the ip igmp
snooping mrouter interface command in the VLAN context. The interface to the
router must be a part of the VLAN where you are entering the command.
ip igmp snooping querier
Enable IGMP querier processing for the VLAN interface.
S5000
Syntax
ip igmp snooping querier
To disable IGMP querier processing for the VLAN interface, use the no ip igmp
snooping querier command.
Defaults Not configured.
Command Modes INTERFACE VLAN — (conf-if-vl- n )
487