Command Line Reference Guide

Related
Commands
show ip igmp groups – displays IGMP group information.
ip igmp version
Manually set the version of the router to IGMPv2 or IGMPv3.
S5000
Syntax
ip igmp version {2 | 3}
Parameters
2 Enter the number 2 to set the IGMP version number to IGMPv2.
3 Enter the number 3 to set the IGMP version number to IGMPv3.
Defaults 2 (that is, IGMPv2)
Command Modes INTERFACE
Command History
Version 9.0(1.3) Introduced on the S5000.
show ip igmp groups
View the IGMP groups.
S5000
Syntax
show ip igmp groups [group-address [detail] | detail |
interface-type slot/port [group-address [detail]]]
Parameters
group-address (OPTIONAL) Enter the group address in dotted decimal format to view
information on that group only.
interface-type
slot/port
(OPTIONAL) Enter the interface type and slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Loopback interface, enter the keyword loopback
followed by a number from 0 to 16383.
480