Command Line Reference Guide
show garp timers
Display the GARP timer settings for sending GARP messages.
S5000
Syntax
show garp timers
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
FTOS#show garp timers
GARP Timers Value (milliseconds)
----------------------------------------
Join Timer 200
Leave Timer 600
LeaveAll Timer 10000
FTOS#
Related
Commands
garp timers – sets the intervals (in milliseconds) for sending GARP messages.
show gvrp
Display the GVRP configuration.
S5000
Syntax
show gvrp [brief | interface-type slot/port]
Parameters
brief (OPTIONAL) Enter the keyword brief to display a brief summary of
the GVRP configuration.
interface-type
slot/port
(OPTIONAL) Enter the interface type followed by slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
463