Command Line Reference Guide

show fip-snooping sessions
Display information on FIP-snooped sessions on all VLANs or a specified VLAN, including the ENode interface and MAC
address, the FCF interface and MAC address, VLAN ID, FCoE MAC address and FCoE session ID number (FC-ID),
worldwide node name (WWNN) and the worldwide port name (WWPN).
S5000
Syntax
show fip-snooping sessions [interface vlan vlan-id]
Parameters
vlan-id Enter the vlan-id of the specified VLAN to be displayed.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show fip-snooping sessions command shown in the
Example below.
Field Description
ENode MAC MAC address of the ENode.
ENode Interface Slot/ port number of the interface connected to the ENode.
FCF MAC MAC address of the FCF.
FCF Interface Slot/ port number of the interface to which the FCF is connected.
VLAN VLAN ID number the session uses.
FCoE MAC MAC address of the FCoE session the FCF assigns.
FC-ID Fibre Channel ID the FCF assigns.
Port WWPN Worldwide port name of the CNA port.
Port WWNN Worldwide node name of the CNA port.
Example
FTOS# show fip-snooping sessions
Enode MAC Enode Intf FCF MAC FCF Intf VLAN FCoE MAC
FC-ID Port WWPN
Port WWNN
----------------------------------------------
00:00:c9:f1:e1:37 Te 0/28 54:7f:ee:34:77:4e Te 1/47 111
0e:fc:00:b5:00:07 b5:00:07 10:00:00:00:c9:f1:e1:37
20:00:00:00:c9:f1:e1:37
00:c0:dd:12:c0:05 Te 1/26 54:7f:ee:34:77:4e Te 1/47 111
0e:fc:00:b5:00:75 b5:00:75 21:00:00:c0:dd:12:c0:05
20:00:00:c0:dd:12:c0:05
446