Command Line Reference Guide

show fip-snooping fcf
Display information on the FCFs in FIP-snooped sessions, including the FCF interface and MAC address, FCF interface,
VLAN ID, FC-MAP value, FKA advertisement period, and number of ENodes connected.
S5000
Syntax
show fip-snooping fcf [fcf-mac-address]
Parameters
fcf-mac-address Enter the MAC address of the FCF to be displayed.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show fip-snooping fcf command shown in the Example
below.
Field Description
FCF MAC MAC address of the FCF.
FCF Interface Slot/port number of the interface to which the FCF is connected.
VLAN VLAN ID number the session uses.
FC-MAP FC-Map value the FCF advertises.
ENode Interface Slot/ number of the interface connected to the ENode.
FKA_ADV_PERIO
D
Time (in milliseconds) during which FIP keep-alive advertisements
transmit.
No of ENodes Number of ENodes connected to the FCF.
FC-ID Fibre Channel session ID the FCF assigns.
Example
FTOS# show fip-snooping fcf
FCF MAC FCF Interface VLAN FC-MAP FKA_ADV_PERIOD No. of
Enodes
------- ------------- ---- ------ -------------- -------------
54:7f:ee:37:34:40 Po 22 100 0e:fc:00 4000
2
445