Command Line Reference Guide

vlan-id vlan-id Enter the keywords vlan-id followed by the VLAN to which the
host belongs. The range is 2 to 4094.
ip ip-address Enter the keyword ip followed by the IP address that the server is
leasing.
interface type Enter the keyword interface followed by the type of interface to
which the host is connected:
• For a Gigabit Ethernet interface, enter the keyword
gigabitethernet.
• For a Ten Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease followed by the amount of time the IP
address will be leased. The range is 1 to 4294967295.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
show ip dhcp snooping – displays the contents of the DHCP binding table.
ip dhcp snooping database
Delay writing the binding table for a specified time.
S5000
Syntax
ip dhcp snooping database write-delay minutes
Parameters
minutes The range is 5 to 21600.
Defaults none
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
428