Command Line Reference Guide

netbios-name-server
Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that are available
to Microsoft Dynamic Host Configuration Protocol (DHCP) clients.
S5000
Syntax
netbios-name-server address [address2...address8]
Parameters
address Enter the address of the NETBIOS name server. You may enter up to
eight, in order of preference.
Defaults none
Command Modes DHCP <POOL>
Command History
Version 9.0(1.3) Introduced on the S5000.
netbios-node-type
Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking recommends specifying clients as
hybrid.
S5000
Syntax
netbios-node-type type
Parameters
type Enter the NETBIOS node type:
• Broadcast: Enter the keyword b-node.
• Hybrid: Enter the keyword h-node.
• Mixed: Enter the keyword m-node.
• Peer-to-peer: Enter the keyword p-node.
Defaults Hybrid
Command Modes DHCP <POOL>
Command History
Version 9.0(1.3) Introduced on the S5000.
422