Command Line Reference Guide

disable
Disable the DHCP server.
S5000
Syntax
disable
DHCP Server is disabled by default. Enable the system to be a DHCP server using the no
disable command.
Defaults Disabled
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
dns-server
Assign a DNS server to clients based on address pool.
S5000
Syntax
dns-server address [address2...address8]
Parameters
address Enter the a list of DNS servers that may service clients on the subnet.
You may list up to eight servers, in order of preference.
Defaults none
Command Modes DHCP <POOL>
Command History
Version 9.0(1.3) Introduced on the S5000.
domain-name
Assign a domain to clients based on the address pool.
S5000
Syntax
domain-name name
Parameters
name Give a name to the group of addresses in a pool.
419