Command Line Reference Guide

Usage
Information
Entering <CR> after the clear ip dhcp binding command clears all the IPs from the
binding table.
debug ip dhcp server
Display FTOS debugging messages for DHCP.
S5000
Syntax
debug ip dhcp server [events | packets]
Parameters
events Enter the keyword events to display the DHCP state changes.
packet Enter the keyword packet to display packet transmission/reception.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
default-router
Assign a default gateway to clients based on the address pool.
S5000
Syntax
default-router address [address2...address8]
Parameters
address Enter a list of routers that may be the default gateway for clients on
the subnet. You may specify up to eight routers. List them in order of
preference.
Defaults none
Command Modes DHCP <POOL>
Command History
Version 9.0(1.3) Introduced on the S5000.
418