Command Line Reference Guide

Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
(Summary)
FTOS#show interfaces te 0/0 pfc statistics
Interface TenGigabitEthernet 0/0
Priority Rx XOFF Frames Rx Total Frames Tx Total Frames
--------------------------------------------------------
0 0 0 0
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
7 0 0 0
show stack-unit stack-ports ets detail
Displays the ETS configuration applied to egress traffic on stacked ports, including the ETS operational mode on each
unit and the configured priority groups with dot1p priorities, bandwidth allocation, and scheduler type.
S5000
Syntax
show stack-unit {unit-number | all} stack-ports {all ets detail
Parameters
stack-unit unit-
number
Enter the keyword stack-unit followed by a number. The range is
0 to 11.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
(Summary)
FTOS(conf)# show stack-unit all stack-ports all ets detail
Stack unit 0 stack port all
Max Supported TC Groups is 4
Number of Traffic Classes is 1
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,3,4,5,6,7 100% ETS
1 - -
2 - -
3 - -
4 - -
414