Command Line Reference Guide

Field Description
PFC Link Delay Link delay (in quanta) used to pause specified
priority traffic.
Application Priority TLV: FCOE TLV Tx
Status
Status of FCoE advertisements in application
priority TLVs from the local DCBx port: enabled
or disabled.
Application Priority TLV: iSCSI TLV Tx
Status
Status of iSCSI advertisements in application
priority TLVs from the local DCBx port: enabled
or disabled.
Application Priority TLV: Local FCOE
Priority Map
Priority bitmap the local DCBx port uses in
FCoE advertisements in application priority
TLVs.
Application Priority TLV: Local iSCSI
Priority Map
Priority bitmap the local DCBx port uses in
iSCSI advertisements in application priority
TLVs.
Application Priority TLV: Remote FCOE
Priority Map
Status of FCoE advertisements in application
priority TLVs from the remote peer port:
enabled or disabled.
Application Priority TLV: Remote iSCSI
Priority Map
Status of iSCSI advertisements in application
priority TLVs from the remote peer port:
enabled or disabled.
Input TLV pkts Number of PFC TLVs received.
Output TLV pkts Number of PFC TLVs transmitted.
Error TLV pkts Number of PFC error packets received.
Pause Tx pkts Number of PFC pause frames transmitted.
Pause Rx pkts Number of PFC pause frames received.
Input Appln Priority TLV pkts Number of Application Priority TLVs received.
Output Appln Priority TLV pkts Number of Application Priority TLVs
transmitted.
Error Appln Priority TLV pkts Number of Application Priority error packets
received.
Example
FTOS# show interfaces tengigabitethernet 0/49 pfc summary
Interface TenGigabitEthernet 0/49
Admin mode is on
Admin is enabled
Remote is enabled, Priority list is 4
Remote Willing Status is enabled
Local is enabled
Oper status is Recommended
PFC DCBx Oper status is Up
State Machine Type is Feature
TLV Tx Status is enabled
PFC Link Delay 45556 pause quantams
Application Priority TLV Parameters :
412