Command Line Reference Guide

Table 3. Output Fields for the show interface pfc Command
Field Description
Interface Interface type with stack-unit number and port
number.
Admin mode is on Admin is enabled PFC admin mode is on or off with a list of the
configured PFC priorities . When the PFC
admin mode is on, PFC advertisements are
enabled to be sent and received from peers;
received PFC configuration will take effect.
The admin operational status for a DCBx
exchange of PFC configuration is enabled or
disabled.
Remote is enabled, Priority list Remote
Willing Status is enabled
Operational status (enabled or disabled) of
peer device for DCBx exchange of PFC
configuration with a list of the configured PFC
priorities . Willing status of peer device for
DCBx exchange (Willing bit received in PFC
TLV): enabled or disable.
Local is enabled DCBx operational status (enabled or disabled)
with a list of the configured PFC priorities.
Operational status (local port) Port state for current operational PFC
configuration:
• Init: Local PFC configuration
parameters were exchanged with the
peer.
• Recommend: Remote PFC
configuration parameters were
received from the peer.
• Internally propagated: PFC
configuration parameters were
received from the configuration
source.
PFC DCBx Oper status DCBx operational status of the exchange of
PFC configuration on the local port: up (match)
or down (mismatch).
Reason: Displays when the DCBx operational status for
PFC on a port is down. For a description of
each reason, refer to the DCB chapter in the
S5000 Configuration Guide.
State Machine Type Type of state machine used for DCBx
exchanges of the PFC parameters: Feature —
for legacy DCBx versions; Symmetric — for an
IEEE version.
TLV Tx Status Status of the PFC TLV advertisements: enabled
or disabled.
411