Command Line Reference Guide

Field Description
State Machine Type Type of state machine used for DCBx exchanges of ETS
parameters: Feature — for legacy DCBx versions;
Asymmetric — for an IEEE version.
Conf TLV Tx Status Status of ETS Configuration TLV advertisements: enabled
or disabled.
Reco TLV Tx Status Status of ETS Recommendation TLV advertisements:
enabled or disabled.
Input Conf TLV pkts Number of ETS Configuration TLVs received.
Output Conf TLV pkts Number of ETS Configuration TLVs transmitted.
Error Conf TLV pkts Number of ETS Error Configuration TLVs received.
The following table describes the fields displayed in show interface ets command
output.
Example
(summary)
FTOS(conf)# show interfaces tengigabitethernet 0/0 ets summary
Interface TenGigabitEthernet 0/0
Max Supported TC Groups is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters :
------------------
Admin is enabled
TC-grp Priority# Bandwidth TSA
0 0,1,2,3,4,5,6,7 100% ETS
1 0% ETS
2 0% ETS
3 0% ETS
4 0% ETS
5 0% ETS
6 0% ETS
7 0% ETS
Priority# Bandwidth TSA
0 13% ETS
1 13% ETS
2 13% ETS
3 13% ETS
4 12% ETS
5 12% ETS
6 12% ETS
7 12% ETS
Remote Parameters:
-------------------
Remote is disabled
Local Parameters :
------------------
Local is enabled
TC-grp Priority# Bandwidth TSA
0 0,1,2,3,4,5,6,7 100% ETS
1 0% ETS
2 0% ETS
3 0% ETS
4 0% ETS
5 0% ETS
6 0% ETS
408