Command Line Reference Guide
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
fcoe priority-bits
Configure the FCoE priority advertised for the FCoE protocol in application priority TLVs.
S5000
Syntax
fcoe priority-bits priority-bitmap
To remove the configured FCoE priority, use the no fcoe priority-bits command.
Parameters
priority-bitmap
Enter the priority-bitmap range. The range is 1 to FF.
Defaults 0x8
Command Modes PROTOCOL LLDP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
This command is available at the global level only.
iscsi priority-bits
Configure the iSCSI priority advertised for the iSCSI protocol in application priority TLVs.
S5000
Syntax
iscsi priority-bits priority-bitmap
To remove the configured iSCSI priority, use the no iscsi priority-bits command.
Parameters
priority-bitmap
Enter the priority-bitmap range. The range is 1 to FF.
Defaults 0x10
Command Modes PROTOCOL LLDP
Command History
Version 9.0(1.3) Introduced on the S5000.
396