Command Line Reference Guide

clear ets counters
Clear all ETS TLV counters on an interface.
S5000
Syntax
clear ets counters interface-type slot/port
Parameters
interface-type
slot/port
Enter one of the following interface types and slot/port information.
Valid slot numbers are 0-11. The valid port numbers for each interface
type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear pfc counters
Clear the PFC TLV counters and PFC statistics on an interface or stack unit.
S5000
Syntax
clear pfc counters {[interface-type slot/port | stack-unit]
[unit-number | all ] [stack-ports all]}
Parameters
interface-type
slot/port
Enter one of the following keywords and slot/port or number
information. Valid slot numbers are 0-11. The valid port numbers for
each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
stack-unit unit-
number
Enter the keyword stack-unit followed by a number. The range is
0 to 11.
391