Command Line Reference Guide

Data Center Bridging (DCB)

Data center bridging (DCB) refers to a set of IEEE Ethernet enhancements that provide data centers with a single, robust,

converged network to support multiple traffic types, including local area network (LAN), server, and storage traffic.

FTOS commands for data center bridging features include 802.1Qbb priority-based flow control (PFC), 802.1Qaz

enhanced transmission selection (ETS), and the data center bridging exchange (DCBx) protocol.

This chapter includes the following sections:

• DCB Command

• PFC Commands

• ETS Commands

• DCBx Commands

DCB Command

The following DCB command is supported on the S5000 platform.

advertise dcbx-appln-tlv

On a DCBx port with a manual role, configure the application priority TLVs advertised on the interface to DCBx peers.

S5000

Syntax

advertise dcbx-appln-tlv {fcoe | iscsi}

To remove the application priority TLVs, use the no advertise dcbx-appln-tlv

{fcoe | iscsi} command.

Parameters

{fcoe | iscsi} Enter the application priority TLVs, where:

• fcoe: enables the advertisement of FCoE in application

priority TLVs.

• iscsi: enables the advertisement of iSCSI in application

priority TLVs.

Defaults Application priority TLVS are enabled to advertise FCoE and iSCSI.

Command Modes PROTOCOL LLDP

389