Command Line Reference Guide

13
Control Plane Policing (CoPP)
The CoPP commands are supported on the S5000 switch.
control-plane-cpuqos
Enter control-plane mode and configure the switch to manage control-plane traffic.
S5000
Syntax
control-plane-cpuqos
Defaults Not configured.
Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control traffic on a per-queue basis.
S5000
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 140 characters.
Defaults Not configured.
Command Modes CONTROL-PLANE-CPUQOS
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
You must create a policy-map by associating a queue number with the qos-policy.
You must create QoS policies prior to enabling this command.
383