Command Line Reference Guide

You can also use the show bootvar command to display the current Reload mode for BMP
2.0 with the path of the FTOS image file retrieved from a DHCP server.
Example
FTOS#show reload-type
Reload-Type : normal-reload [Next boot : normal-reload]
Related
Commands
reload type – configures Reload mode as normal or Jumpstart.
stop jump-start
Stop the switch from reloading in Jumpstart mode to prevent an infinite loop.
S5000
Syntax
stop jump-start
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced for the S5000.
Usage
Information
Use the stop jump-start command on a switch running BMP 2.0 if the switch enters a
loop while reloading in Jumpstart mode; loop occurs when the switch is continuously trying to
contact a DHCP server and a DHCP server is not found. The
stop jump-start command
stops the switch from connecting to the DHCP server. After you use the stop jump-start
command, the next default reload type is a normal reload. This is indicated in the show
reload-type
command.
Related
Commands
reload type – configures Rload mode as normal or Jumpstart.
375