Command Line Reference Guide

Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp damp command shown in the Example below.
Field Description
Network Displays the network ID to which the route is dampened.
From Displays the IP address of the neighbor advertising the dampened
route.
Reuse Displays the hour:minutes:seconds until the dampened route is
available.
Path Lists all the ASs the dampened route passed through to reach the
destination network.
Example
FTOS>show ip bgp damp
BGP table version is 210708, local router ID is 63.114.8.2
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network From Reuse Path
FTOS>
show ip bgp filter-list
View the routes that match the filter lists.
S5000
Syntax
show ip bgp ipv4 multicast filter-list as-path-name
Parameters
as-path-name Enter the name of an AS-PATH.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
355