Command Line Reference Guide
clear ip bgp dampening
Clear information on route dampening.
S5000
Syntax
clear ip bgp dampening ipv4 multicast network network-mask
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
network
(OPTIONAL) Enter the network address in dotted decimal format
(A.B.C.D).
network-mask
(OPTIONAL) Enter the network mask in slash prefix format (/x).
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
clear ip bgp flap-statistics
Clear BGP flap statistics, which includes number of flaps and the time of the last flap.
S5000
Syntax
clear ip bgp ipv4 multicast flap-statistics network | filter-
list list |regexp regexp
Parameters
Network (OPTIONAL) Enter the network address to clear flap statistics in
dotted decimal format (A.B.C.D).
filter-list
as-path-
name
(OPTIONAL) Enter the keyword filter-list followed by the
name of a configured AS-PATH list (maximum 16 characters).
regexp
regular-
expression
(OPTIONAL) Enter the keyword regexp followed by regular
expressions. Use one or a combination of the following:
• . = (period) any single character (including a white space).
• * = (asterisk) the sequences in a pattern (0 or more
sequences).
• + = (plus) the sequences in a pattern (1 or more sequences).
• ? = (question mark) sequences in a pattern (either 0 or 1
sequences).
NOTE: You must enter an escape sequence (CTRL+v) prior
to entering the ? regular expression.
• [ ] = (brackets) a range of single-character patterns.
339