Command Line Reference Guide

show running-config bgp
Use this feature to display the current BGP configuration.
S5000
Syntax
show running-config bgp
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
timers bgp
Adjust the BGP Keep Alive and Hold Time timers.
S5000
Syntax
timers bgp keepalive holdtime
To return to the default, use the no timers bgp command.
Parameters
keepalive Enter a number for the time interval, in seconds, between keepalive
messages sent to the neighbor routers. The range is 1 to 65535. The
default is 60 seconds.
holdtime Enter a number for the time interval, in seconds, between the last
keepalive message and declaring the router dead. The range is 3 to
65535. The default is 180 seconds.
Defaults none
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the internet and
connecting multicast topologies between BGP and autonomous systems (ASs).
FTOS MBGP is implemented as per IETF RFC 1858. BGPv4 is supported on the S5000 switch.
335