Command Line Reference Guide

show ip bgp summary
Allows you to view the status of all BGP connections.
S5000
Syntax
show ip bgp [ipv4 unicast] summary
Command Modes
EXEC
EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp summary command shown in the Example
below.
Field Description
BGP router
identifier
Displays the local router ID and the AS number.
BGP table version Displays the BGP table version and the main routing table version.
network entries Displays the number of network entries, route paths, and the amount
of memory used to process those entries.
paths Displays the number of paths and the amount of memory used.
denied paths Displays the number of denied paths and the amount of memory used.
BGP path
attribute entries
Displays the number of BGP path attributes and the amount of
memory used to process them.
BGP AS-PATH
entries
Displays the number of BGP AS_PATH attributes processed and the
amount of memory used to process them.
BGP community
entries
Displays the number of BGP COMMUNITY attributes processed and
the amount of memory used to process them. The show ip bgp
community command provides more details on the COMMUNITY
attributes.
Dampening
enabled
Displayed only when you enable dampening. Displays the number of
paths designated as history, dampened, or penalized.
Neighbor Displays the BGP neighbor address.
AS Displays the AS number of the neighbor.
MsgRcvd Displays the number of BGP messages that neighbor received.
MsgSent Displays the number of BGP messages that neighbor sent.
TblVer Displays the version of the BGP table that was sent to that neighbor.
InQ Displays the number of messages from that neighbor waiting to be
processed.
333