Command Line Reference Guide

13646:1154 13646:1164 13646:1184 13646:1194 13646:1204
13646:1214 13646:1224
13646:1234 13646:1244 13646:1254 13646:1264 13646:3000
0x1d65b2ac 117 6 209:209 209:999 209:31272
0x1f5854ac 119 18 209:209 209:21226 286:108 286:111
286:777 286:3033
517:5104
show ip bgp peer-group
Allows you to view information on the BGP peers in a peer group.
S5000
Syntax
show ip bgp [ipv4 unicast] peer-group [peer-group-name [detail
| summary]]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
peer-group-name (OPTIONAL) Enter the name of a peer group to view information about
that peer group only.
detail (OPTIONAL) Enter the keyword detail to view detailed status
information of the peers in that peer group.
summary (OPTIONAL) Enter the keyword summary to view status information
of the peers in that peer group. The output is the same as that found
in the show ip bgp summary command.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The following describes the show ip bgp peer-group command shown in the Example
below.
Lines beginning
with
Description
Peer-group Displays the peer group’s name.
Administratively
shut
Displays the peer group’s status if the peer group is not enabled. If
you enable the peer group, this line is not displayed.
BGP version Displays the BGP version supported.
Minimum time Displays the time interval between BGP advertisements.
329