Command Line Reference Guide

*>i 6.5.0.0/19 205.171.0.16 100 0 209 7170 1455
i
*>i 6.8.0.0/20 205.171.0.16 100 0 209 7170 1455
i
*>i 6.9.0.0/20 205.171.0.16 100 0 209 7170 1455
i
*>i 6.10.0.0/15 205.171.0.16 100 0 209 7170 1455
i
*>i 6.14.0.0/15 205.171.0.16 100 0 209 7170 1455
i
*>i 6.133.0.0/21 205.171.0.16 100 0 209 7170 1455
i
*>i 6.151.0.0/1 205.171.0.16 100 0 209 7170 1455
i
--More--
show ip bgp community-list
View routes that are affected by a specific community list.
S5000
Syntax
show ip bgp [ipv4 unicast] community-list community-list-name
[exact-match]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
community-list-
name
Enter the name of a configured IP community list (max 16 characters).
exact-match Enter the keyword for an exact match of the communities.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The show ip bgp community-list command without any parameters lists BGP routes
matching the Community List and the output is the same as for the show ip bgp command
output.
The following describes the show ip bgp community-list pass command shown in
the Example below.
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is listed in
this column, then local routes exist in the routing table.
312