Command Line Reference Guide
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
When you enable the bgp non-deterministic-med command, the show ip bgp
command output for a BGP route does not list the INACTIVE reason.
The following describes the show ip bgp command shown in the Example below.
Field Description
Network Displays the destination network prefix of each BGP route.
Next Hop Displays the next hop address of the BGP router. If 0.0.0.0 is listed in
this column, then local routes exist in the routing table.
Metric Displays the BGP route’s metric, if assigned.
LocPrf Displays the BGP LOCAL_PREF attribute for the route.
Weight Displays the route’s weight.
Path Lists all the ASs the route passed through to reach the destination
network.
Example
FTOS>show ip bgp
BGP table version is 847562, local router ID is 63.114.8.131
Status codes: s suppressed, d damped, h history, * valid, >
best
Path source: I - internal, a - aggregate, c - confed-external,
r - redistributed, n - network
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 0.0.0.0/0 63.114.8.33 0 18508 i
* 3.0.0.0/8 63.114.8.33 0 18508 209
701 80 i
*> 63.114.8.33 0 18508 701 80
i
*> 3.3.0.0/16 0.0.0.0 22 32768 ?
63.114.8.35 0 18508 ?
*> 4.0.0.0/8 63.114.8.33 0 18508 701 1 i
*> 4.2.49.12/30 63.114.8.33 0 18508 209 i
* 4.17.250.0/24 63.114.8.33 0 18508 209
1239 13716 i
*> 63.114.8.33 0 18508 701
1239 13716 i
* 4.21.132.0/23 63.114.8.33 0 18508 209
6461 16422 i
*> 63.114.8.33 0 18508 701
6461 16422 i
*> 4.24.118.16/30 63.114.8.33 0 18508 209 i
*> 4.24.145.0/30 63.114.8.33 0 18508 209 i
*> 4.24.187.12/30 63.114.8.33 0 18508 209 i
*> 4.24.202.0/30 63.114.8.33 0 18508 209 i
*> 4.25.88.0/30 63.114.8.33 0 18508 209
3561 3908 i
*> 5.0.0.0/9 63.114.8.33 0 0 18508 ?
*> 5.0.0.0/10 63.114.8.33 0 0 18508 ?
*> 5.0.0.0/11 63.114.8.33 0 0 18508 ?
--More--
308