Command Line Reference Guide

Related
Commands
show ip bgp summary – displays the current BGP configuration.
neighbor next-hop-self
Allows you to configure the router as the next hop for a BGP neighbor. (This command is used for IBGP).
S5000
Syntax
neighbor {ip-address | peer-group-name} next-hop-self
To return to the default setting, use the no neighbor {ip-address | peer-group-
name} next-hop-self command.
Parameters
ip-address Enter the IP address of the neighbor in dotted decimal format.
peer-group-name Enter the name of the peer group.
Defaults Disabled.
Command Modes ROUTER BGP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
If you configure the set next-hop command in ROUTE-MAP mode, the configuration takes
precedence over the neighbor next-hop-self command.
neighbor password
Enable message digest 5 (MD5) authentication on the TCP connection between two neighbors.
S5000
Syntax
neighbor {ip-address | peer-group-name} password [encryption-
type] password
To delete a password, use the no neighbor {ip-address | peer-group-name}
password
command.
Parameters
ip-address Enter the IP address of the router to be included in the peer group.
peer-group-name Enter the name of a configured peer group.
encryption-type (OPTIONAL) Enter 7 as the encryption type for the password entered.
7 means that the password is encrypted and hidden.
password
Enter a text string up to 80 characters long. The first character of the
password must be a letter.
291