Command Line Reference Guide

neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
S5000
Syntax
neighbor {ip-address | peer-group-name} advertisement-interval
seconds
To return to the default value, use the no neighbor {ip-address | peer-group-
name} advertisement-interval command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group-name Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
seconds Enter a number as the time interval, in seconds, between BGP
advertisements. The range is 0 to 600 seconds. The default is 5
seconds for internal BGP peers and 30 seconds for external BGP
peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Command Modes ROUTER BGP
Command History
Version 9.0(1.3) Introduced on the S5000.
neighbor advertisement-start
Set the minimum interval before starting to send BGP routing updates.
S5000
Syntax
neighbor {ip-address} advertisement-start seconds
To return to the default value, use the no neighbor {ip-address}
advertisement-start command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
seconds Enter a number as the time interval, in seconds, before BGP route
updates are sent. The range is 0 to 3600 seconds.
283