Command Line Reference Guide

Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
By default, when you create a neighbor/peer group configuration in the Router BGP context,
this enables IPv4/Unicast AFI/SAFI. When you use activate in the new context, the
neighbor/peer group enables for AFI/SAFI.
neighbor add-path
This command allows the specified neighbor/peer group to send/receive multiple path advertisements.
S5000
Syntax
neighbor [ip-address | peer-group-name] add-path [send |
receive | both] count
Parameters
ip-address
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group-name
(OPTIONAL) Enter the name of the peer group.
send Enter the keyword send to indicate that the system will send multiple
paths to peers.
receive Enter the keyword receive to indicate that the system will accept
multiple paths from peers.
both Enter the keyword both to indicate that the system will send and
accept multiple paths from peers.
count
Enter the number paths supported. The range is 2 to 64.
Defaults none
Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
bgp add-path – allows the advertisement of multiple paths for the same address prefix without
the new paths implicitly replacing any previous ones.
282