Command Line Reference Guide

Related
Commands
clear ip bgp – activates inbound policies without resetting the BGP TCP session.
capture bgp-pdu max-buffer-size
Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses.
S5000
Syntax
capture bgp-pdu max-buffer-size 100-102400000
Parameters
100-102400000 Enter a size for the capture buffer.
Defaults 40960000 bytes.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
capture bgp-pdu neighbor – enables capture of an IPv4 BGP neighbor packet.
capture bgp-pdu neighbor (ipv6) – enables capture of an IPv6 BGP neighbor packet.
capture bgp-pdu neighbor
Enable capture of an IPv4 BGP neighbor packet.
S5000
Syntax
capture bgp-pdu neighbor ipv4-address direction {both | rx |
tx}
To disable capture of the IPv4 BGP neighbor packet, use the no capture bgp-pdu
neighbor ipv4-address command.
Parameters
ipv4-address Enter the IPv4 address of the target BGP neighbor.
direction {both |
rx | tx}
Enter the keyword direction and a direction—either rx for
inbound, tx for outbound, or both.
Defaults Not configured.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
270