Command Line Reference Guide

Defaults Disabled
Command Modes ROUTER BGP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The MED is a 4-byte unsigned integer value and the default behavior is to assume a missing
MED as 4294967295. This command causes a missing MED to be treated as 0. During path
selection, paths with a lower MED are preferred over those with a higher MED.
bgp bestpath router-id ignore
Do not compare router-id information for external paths during best path selection.
S5000
Syntax
bgp bestpath router-id ignore
To return to the default selection, use the no bgp bestpath router-id ignore
command.
Defaults Disabled
Command Modes ROUTER BGP
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Configuring this option retains the current best-path. When sessions are subsequently reset,
the oldest received path is chosen as the best-path.
bgp client-to-client reflection
Allows you to enable route reflection between clients in a cluster.
S5000
Syntax
bgp client-to-client reflection
To disable client-to-client reflection, use the no bgp client-to-client
reflection command.
Defaults Enabled when a route reflector is configured.
Command Modes ROUTER BGP
Command History
Version 9.0(1.3) Introduced on the S5000.
259