Command Line Reference Guide
Related
Commands
bgp default local-preference – changes the default LOCAL_PREF attribute for all routes.
set metric
Configure a filter to assign a new metric to redistributed routes.
S5000
Syntax
set metric [+ | -] metric-value
To delete a setting, enter no set metric.
Parameters
+ (OPTIONAL) Enter + to add a metric-value to the redistributed routes.
- (OPTIONAL) Enter - to subtract a metric-value from the redistributed
routes.
metric-value
Enter a number as the new metric value. The range is zero (0) to
4294967295.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
set automatic-tag – computes the tag value of the route.
set level – specifies the OSPF area for route redistribution.
set metric-type – specifies the route type assigned to redistributed routes.
set tag – specifies the tag assigned to redistributed routes.
set metric-type
Configure a filter to assign a new route type for routes redistributed to OSPF.
S5000
Syntax
set metric-type {internal | external | type-1 | type-2}
Parameters
internal Enter the keyword internal to assign the Interior Gateway
Protocol metric of the next hop as the route’s BGP MULTI_EXIT_DES
(MED) value.
239