Command Line Reference Guide

match ip next-hop
Configure a filter to match based on the next-hop IP addresses specified in an IP access list or IP prefix list.
S5000
Syntax
match ip next-hop {access-list | prefix-list prefix-list-name}
Parameters
access-list-name Enter the name of a configured IP access list, up to 140 characters.
prefix-list prefix-
list-name
Enter the keywords prefix-list and then enter the name of
configured prefix list, up 10 140 characters.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
Related
Commands
match interface – redistributes routes that match the next-hop interface.
match ip address – redistributes routes that match an IP address.
match ip route-source – redistributes routes that match routes advertised by other routers.
match metric – redistributes routes that match a specific metric.
match route-type – redistributes routes that match a route type.
match tag – redistributes routes that match a specific tag.
match ip route-source
Configure a filter to match based on the routes advertised by routes specified in IP access lists or IP prefix lists.
S5000
Syntax
match ip route-source {access-list | prefix-list prefix-list-
name}
Parameters
access-list-name Enter the name of a configured IP access list, up to 140 characters.
prefix-list prefix-
list-name
Enter the keywords prefix-list and then enter the name of
configured prefix list, up to 140 characters.
Defaults Not configured.
Command Modes ROUTE-MAP
Command History
Version 9.0(1.3) Introduced on the S5000.
231