Command Line Reference Guide

Command Modes CONFIGURATION
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Prefix lists redistribute OSPF and RIP routes meeting specific criteria.
Related
Commands
show ip route list – displays IP routes in an IP prefix list.
show ip prefix-list summary – displays a summary of the configured prefix lists.
permit
Configure a filter that passes packets meeting the criteria specified.
S5000
Syntax
permit ip-prefix [ge min-prefix-length] [le max-prefix-length]
Parameters
ip-prefix Specify an IP prefix in the network/length format. For example,
35.0.0.0/8 means match the first 8 bits of address 35.0.0.0.
ge min-prefix-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prefix
length, which is a number from zero (0) to 32.
le max-prefix-
length
(OPTIONAL) Enter the keyword le and then enter the maximum prefix
length, which is a number from zero (0) to 32.
Command Modes PREFIX-LIST
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Sequence numbers for this filter are automatically assigned starting at sequence number 5.
If you do not use the ge or le options, only packets with an exact match to the prefix are
filtered.
Related
Commands
deny – configures a filter to drop packets.
seq – configures a drop or permit filter with a specified sequence number.
223