Command Line Reference Guide

Related
Commands
ip prefix-list — configures a prefix list.
deny
Configure a filter to drop packets meeting the criteria specified.
S5000
Syntax
deny ip-prefix [ge min-prefix-length] [le max-prefix-length]
Parameters
ip-prefix Specify an IP prefix in the network/length format. For example,
35.0.0.0/ 8 means match the first 8 bits of address 35.0.0.0.
ge min-prefix-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prefix
length, which is a number from zero (0) to 32.
le max-prefix-
length
(OPTIONAL) Enter the keyword le and then enter the maximum prefix
length, which is a number from zero (0) to 32.
Defaults Not configured.
Command Modes PREFIX-LIST
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
Sequence numbers for this filter are automatically assigned starting at sequence number 5.
If you do not use the ge or le options, only packets with an exact match to the prefix are
filtered.
Related
Commands
permit – configures a filter to pass packets.
seq – configures a drop or permit filter with a specified sequence number.
ip prefix-list
Enter the PREFIX-LIST mode and configure a prefix list.
S5000
Syntax
ip prefix-list prefix-name
Parameters
prefix-name Enter a string up to 16 characters long as the name of the prefix list,
up to 140 characters long.
222