Command Line Reference Guide
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel
followed by a number from 1 to 128.
in | out Identify whether ACL is applied on ingress or egress side.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
show mac accounting access-list
Display MAC access list configurations and counters (if configured).
S5000
Syntax
show mac accounting access-list access-list-name interface type
slot/port in | out
Parameters
access-list-name
Enter the name of a configured MAC ACL, up to 140 characters.
interface
type
slot/port
Enter the interface keyword followed by the interface type and
slot/port or number information. Valid slot numbers are 0-11. The valid
port numbers for each interface type are listed below.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by slot/port numbers.
The port range is 0 to 63.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by slot/port numbers. The ports are 48,
52, 56, and 60.
• For a Port Channel interface, enter the keywords port-
channel followed by a number from 1 to 128.
in | out Identify whether an ACL is applied on the ingress or egress side.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
Usage
Information
The ACL hit counters in this command increment the counters for each matching rule, not just
the first matching rule.
210