Command Line Reference Guide

access-class
Apply a standard ACL to a terminal line.
S5000
Syntax
access-class access-list-name
Parameters
access-list-name Enter the name of a configured Standard ACL, up to 140 characters.
Defaults Not configured.
Command Modes LINE
Command History
Version 9.0(1.3) Introduced on the S5000.
clear counters ip access-group
Erase all counters maintained for access lists.
S5000
Syntax
clear counters ip access-group [access-list-name]
Parameters
access-list-name (OPTIONAL) Enter the name of a configured access-list, up to 140
characters.
Command Modes EXEC Privilege
Command History
Version 9.0(1.3) Introduced on the S5000.
ip access-group
Assign an IP access list (IP ACL) to an interface.
S5000
Syntax
ip access-group access-list-name {in} [implicit-permit] [vlan
vlan-id]
Parameters
access-list-name Enter the name of a configured access list, up to 140 characters.
180