Command Line Reference Guide

enable
Set the access privilege level.
S5000
Syntax
enable {user | admin}
Command Modes BOOT USER
Command History
Version 9.0(1.3) Introduced on the S5000.
help
Display the Help menu.
S5000
Syntax
help
Command Modes BOOT USER
Command History
Version 9.0(1.3) Introduced on the S5000.
Example
BOOT_USER # help
***** Dell Force10 Boot Interface Help Information *****
Current access level: USER LEVEL
Use "syntax help" for more information on syntax.
Available command list (30 commands total):
boot change [primary|secondary|default]
change operating system boot parameters
boot messages disable
turn off netbsd boot messages
boot messages enable
turn on netbsd boot messages
boot show net config retries
show number of retries for network boot config failure
boot write net config retries <int>
write number of retries for network boot config failure
boot zero [primary|secondary|default]
zero operating system boot parameters
default-gateway <ip-address>
default-gateway - set the default gateway ip address
enable [user|admin]
change access privilege level
-(26%)-Use <CR> to continue, q to stop:
help
display help menu
ignore enable-password
ignore enable password
ignore startup-config
ignore system starup-config
interface management ethernet ip address <ip/mask>
168